Hyundai Cars & Trucks - Recent Questions, Troubleshooting & Support


I finally figured this out. I was putting the o-ring on incorrectly. I actually had two o-rings installed.
The o-ring should not be visible when it is tightened down. The plastic should be touching the metal housing. The o-ring sits inside the housing, right above the threads, but not at the top. Two pictures attached._388.jpg
_389.jpg

2006 Hyundai... | Answered Yesterday


Slow to turn over engine or failure to start quickly ?

Check battery ,if over 5 years old replace

Check fuel pressure with a gauge on motor
May work but not hold pressure when off,thus
slow to start

Can't have spark plugs in motor over 3 years,
nothing to do with miles on then.

Hyundai Cars &... | Answered Yesterday


Mechanics like to remove the glove box to get more working room. Cabin air filters seem to be an afterthought in vehicle design.

Hyundai Cars &... | Answered on Jul 04, 2020


Suraj You should be able to go to any Auto Part Store and ask for a Haynes Repair Manual for your vehicle. It will cover everything bumper to bumper. Last One I purchased was from AutoZone and it cost $29.95

Hyundai Cars &... | Answered on Jul 04, 2020


Haynes manuals are listed for sale online, which can be found by internet search - for example using https://www.google.com

Hyundai Cars &... | Answered on Jul 03, 2020


Pull stereo forward and get the last 4 numbers of serial number off the top of the unit. (It’s quiet easy)Add that number to 1212 and that number is the code. So if the last 4 numbers is 1234 +1234 the code is 2468. Push 1 till you get 2, 2 till you get 4 and so on. 5 is the enter button.
The small sticker is the serial number.
7_20_2018_11_46_19_am.jpeg

Hyundai Cars &... | Answered on Jun 30, 2020


There is a simple solution; you just have to bypass the hood switch, which prevents the alarm from arming as it thinks that the hood is open.
To find the switch, pop open the hood and look at the cross-member on the right of the radiator. Connect the wire to the ground to bypass.
Now you can safely unlock the doors without the alarm going off.

2006 Hyundai... | Answered on Jun 28, 2020


As the coils are identical it doesn't matter what order they are in though it is important they are wired correctly - fortunately this is taken care of by the different lengths of connecting cable.

Matter of diverse interest; each coil is generally only half a coil as they operate in pairs, being wired in pairs and only needing a single trigger to produce sparks for two cylinders. This is the wasted spark principle that has been much used with small 2-cylinder engines for a long, long time.

What this means in practice - a misfire or similar spark problem with a cylinder could be caused by a fault with the other half, the paired coil.
It is best to replace the coils in pairs or at least check the other coil for shorted turns...

Hyundai Cars &... | Answered on Jun 22, 2020


First check the immobiliser is properly disarmed then check for a good spark.

If the immobiliser is OK and you have checked the spark, please repost for further advice.

Hyundai Cars &... | Answered on Jun 20, 2020


790 pages of service info which may provide some help on 98 Accent 1.5 below
https://automotrizenvideo.com/wp-content/uploads/2011/11/manual-de-despiece-hyundai-accent-98-1.5-SOHC.pdf
If you are looking for all equipment which has a connector to the ecu or ecm a wiring diagram would provide info as to where the ecm get info from and where it sends it to.

https://www.cargurus.com/Cars/Discussion-c2203_ds502664
Some general info in link below. Basics of video crank sensor keeps blowing fuse to ecm.
https://www.youtube.com/watch?v=ubkHu4gPbbc

Hyundai Cars &... | Answered on Jun 20, 2020


hi there! i was a master tech 4 hyundai. cant believe no1 has solved this 4 you as yet. please contact myself and i with take you though step by step to resolve.

many thanks

Dominic Hill

2003 Hyundai... | Answered on Jun 17, 2020


Press the radio on button and hold down.
A menu appears, displaying Adjust Initial Volume, release the power button.
Turn volume button to the right to display the Clock menu item.
Press the power button to select the Clock Menu item.
Rotate the volume button to adjust the hour.
Press the power button to move to minutes adjustment.
Rotate the volume button to adjust the minutes.

Hyundai Accent... | Answered on Jun 16, 2020


Throttle Position Sensor needs replacing. It tells the fuel management system how far down you have the accelerator pedal.

Hyundai Cars &... | Answered on Jun 14, 2020


It can be broken baring wheel on waterpump,you can change pupm, belts tensioners. Or it can be hidro valve- which engine oil do you use. Use not 5w30-its too thin ,better use 5w40 or 10w40. Zoran Vrgec, Osijek, Croatia

Hyundai Motor... | Answered on Jun 11, 2020


Was it new or used. Possible a bad battery or connections. A lot of parts houses have a tester to test them.

Hyundai Cars &... | Answered on Jun 05, 2020

Not finding what you are looking for?
Hyundai Logo

43,326 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2004 Hyundai Santa Fe
2004 Hyundai Santa Fe

1,447 Questions

2001 Hyundai Elantra
2001 Hyundai Elantra

1,154 Questions

2000 Hyundai Accent
2000 Hyundai Accent

1,113 Questions

2006 Hyundai Sonata
2006 Hyundai Sonata

1,215 Questions

2001 Hyundai Accent
2001 Hyundai Accent

1,057 Questions

Top Hyundai Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...