Question about Cars & Trucks

1 Answer

How do you know when the battery is fully charged on the Simple Human sensor pump .

Posted by stephanie on

1 Answer


  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Vr2020 Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 6,489 Answers

After 2 hours!

Posted on Jun 14, 2020

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2001 pt won't crank or start new battery 2 weeks ago

You have to know if the battery is charged up first. Simple test: have someone with a voltmeter check the battery. A new battery fully charged should read at least 12.6 volts. A battery with a low charge may not make a starter motor spin the engine over.
If the battery is good, then you go by process of elimination through the start circuit-not that many things in most starting circuits.

Nov 08, 2016 | Cars & Trucks

1 Answer

Just change fuel pump an still won't start.

This will take several tests so when you have time let me know and we will begin. If your advanced enough I will lay out a few tests.
1. When you turn on the key do you actually hear the pump working?
2. Make sure the connection to the new fuel pump is tightly put together and saftey pin is put back in and if still possible to access wiring still test for power to the pump with wire tester or ohm meter in the connection union.
3. If not check all fuses under the hood and inside the car, make sure they are good whth a test light or ohm meter.
4. Have the fuel solenoid checked or basically purchase a new on they are not expensive anyway.
5 have scanner put on the car make sure all the Cam Sensor,,Crank sensor, Throttle Position Sensor etc, we are looking for any item caught in live data or engine light is on.
6. Make sure battery is connected tightly and is fully charged (FULLY CHARGED) a weak battery reaks havoc on an electrical system. I am fully positive doing the 6 stages you will find your problem I assure you, and you can get a cheap 40 dollar OBD scan tool code reader at autozone or where ever you may shop.
After before all this make sure the security has not been triggered during your work with the new pump!! if it has cycle the remote with full lock and unloce 1 with the key cycle it un and lock with remote is first then lock with remote and open with key. should solve this problem for you.
anything else just ask. thanks the fixya team

May 22, 2015 | 2006 Chrysler 300

1 Answer

1993 buick skylark wont start. its not getting spark. changed coil packs, still no fire. battery is fully charged, fuel pump comes on. why would stop it from turning over fully?

is the check engine light on?if you have no spark, start with the wires, and work your way back. you say that you replaced the coil packs..... it could be a crank position sensor. please get back to me if the check engine light is on. also, let me know what happened from the start. were you driving? has the car sat for a while?

Nov 04, 2012 | 1993 Buick Skylark

2 Answers

Vx v6 auto commodore wont start

could be a neutral switch key switch you have to check to see if you are getting voltage to small starter wire going to your starter motor .and if you are problem could be in starter

Nov 01, 2012 | 1998 Holden VT Commodore

2 Answers

98 vt comodore turns over but wont start

It could be the bcm or the key needs recoding to the immobiliser I had the same problem or it most likely is the crank angle sensor's not sending any information through to the spark plugs rendering your car as useful as a crayboat anchor

Feb 27, 2012 | 1998 Holden VT Commodore

3 Answers

Elantra does not start

sounds like a cam/crank position sensor
run the fault codes to check

Apr 01, 2017 | 2001 Hyundai Elantra

1 Answer

I Have a 2001 X5 that it does not run. The start crank engine but the car will not fire up. I took it to the mechanic and they told me I have to change the fuel pump, fuel filter and fuel pump relay but he...

Hi Helloarno, just got my 2001, 525i running after having similar problem : Remove & clean Crank Sensor (Check wires OK too). Remove plugs/clean & check. Clear flooded intake manifold. Fully charge up battery, start up......... good luck ! Bazza41

Apr 26, 2011 | 2001 BMW 5 Series

1 Answer


Get fuel pressure checked for your vehicle.If the fuel pressure is checked low then its fuel pump related problem.Also it can be clogged fuel filter. Also check the battery voltage.If its low then this problem is related to weak battery.Get the battery charged.A fully charged battery will show 12 volts.If the battery and fuel pressure both checked ok then it can be crank sensor or spark plug related problem.Get it checked by meter. Thanks.Helpmech.

Nov 12, 2010 | 1989 Chevrolet C1500

1 Answer

1995 Lincoln Continental - 4.6 li engine. Car was running fine. Then charging system error began and car eventually drained the battery and left me on the side of the road. I replaced the alternator AND a...

Do yourself a favor , don't play the swap parts game ! Take it to a quailfied repair shop . Every body thinks they can fix car's .They read a little an assume that's the problem . There are specific test for checking fuel pressure an testing the fuel pump electrical circuit . If you want to fix cars go to school . You can't just replace PCM'S - powertrain control modules , they need to be programmed . This requires a factory scan tool or a J-2534 pass through device . Fuel Pump Electrical Circuits Description and Operation

Mar 07, 2017 | 1995 Lincoln Continental

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

john h

Level 3 Expert

23424 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides